Transfers |
- Min connect version The minimum version of the Aspera Connectâ„¢
browser plugin that can be used to transfer with Shares. The version must be in the
form "X.Y" for example, 1, 1.2. If you are using Aspera On-Demand Shares, the minimum
accepted version of Connect is 2.7.8, which is the default setting.
- Upload target rate For example, 1.5 Gbps, 500Mbps, 10 K, 3000. Leave blank to use
the node's settings.
- Upload target rate cap For example, 1.5 Gbps, 500Mbps, 10 K, 3000. Leave blank to
use the node's settings.
- Download target rate For example, 1.5 Gbps, 500Mbps, 10 K, 3000. Leave blank to
use the node's settings.
- Download target rate cap For example, 1.5 Gbps, 500Mbps, 10 K, 3000. Leave blank
to use the node's settings.
- Starting policy: Select the policy to be enforced when the transfer starts:
- Fixed The transfer transmits data at a rate equal to the target rate, although
this may impact the performance of other traffic present on the network.
- High The transfer rate is adjusted to use the available bandwidth up to the
maximum rate.
- Fair The transfer attempts to transmit data at a rate equal to the target rate.
If network conditions do not permit that, it transfers at a rate lower than the target
rate, but not less than the minimum rate.
- Low The transfer rate is less aggressive than Fair when sharing bandwidth with
other network traffic. When congestion occurs, the transfer rate is decreased to the
minimum rate, until other traffic retreats.
- Allowed policy: Select the policies that are available to the user during
transfer. If you do not make any selections, the Inherit from node
setting is displayed, which will apply the settings inherited from the node.
- Encryption: Select Optional or AES-128. If
you do not make any selections, the Inherit from node setting is
displayed, which will apply the settings inherited from the node.
- Encryption at rest: Select Optional or
Required. If you do not make any selections, the Inherit
from node setting is displayed, which will apply the settings inherited from
the node. If you select Required, the uploaded files must be encrypted
during a transfer to protect them while they are stored on a remote server. The uploader
sets a password before uploading the file, and the downloader needs to enter that password
to decrypt the file.
|
Web Server |
Configure the web server settings, including the host, port, and whether SSL/TLS is
enabled. The hostname or IP address entered into the Host field is
used as part of the URL in Shares emails to users. For example, when an account is created
for a user, that user will receive an email prompting the user to reset the password. This
email contains a URL that points to whatever hostname or IP address is entered into the
Host field. |